SPX Cooling Technologies TG MAG86-100, TG MAG185-125 Installation, General, Heated spring casing

Models: TG MAG86-100 TG MAG23-65 TG MAG58-80 TG MAG15-50 TG MAG185-125

1 72
Download 72 pages 42.17 Kb
Page 29
Image 29
3.17.6.2 Heated spring casing

3.17.6.2 Heated spring casing

7041

Pos.

Description – Material

V27

V35

V50

Preventive

Overhaul

 

 

 

 

 

 

 

7041

Heated spring casing

1

1

1

 

 

3.18 Installation

3.18.1 General

This manual gives basic instructions which are to be observed during installation of the pump. It is therefore important that this manual is read by the responsible personnel prior to assembly and after- ward to be kept available at the installation site.

The instructions contain useful and important information allowing the pump/pump unit to be properly installed. They also contain important information to prevent possible accidents and serious damage prior to commissioning and during operation of the installation.

Non-compliance with the safety instructions may produce a risk to the personnel as well as to the environment and the machine, and result in a loss of any right to claim damages.

It is imperative that signs affixed to the machine, e.g. arrow indicating the direction of rotation or symbols indicating fluid connections be observed and kept legible.

Because of the presence of strong magnetic fields there are special safety instructions which must be observed.

Personnel who carry a cardiac pacemaker should not be allowed to work on a pump equipped with magnetic coupling! The magnetic field is sufficiently strong to affect the proper operation of a pace- maker, so keep a safe distance of at least 3 m.

Do not come close (not less than 1 m) to the magnetic coupling with objects equipped with magnetic data carriers such as cheque cards, computer disks, watches etc. to avoid damage and/or loss of information.

Preservation: To prevent damage during transportation, the rotor bearing is blocked on the

drain hole of the pump casing with a protection plug. Remove this protection plug and place the plug (1030) together with the sealing ring (1040) on the pump in plastic bag. Check that the pump shaft can be rotated by hand. Keep the protection plug for subsequent transport, checks or repair work.

Protection

 

plug

1040 1030

Do not subject the pump to any jolting loads. This can cause damage to the magnets or the slide bearings of the rotor shaft on account of their brittleness.

A.0500.551 – IM-TGMAG/02.00 EN (02/2008)

29

Page 29
Image 29
SPX Cooling Technologies TG MAG86-100, TG MAG185-125, TG MAG15-50, TG MAG58-80 Installation, General, Heated spring casing