3.0General information and technical data
3.1Pump standard parts
Outer magnetic rotor
Intermediate cover
Top cover
Idler pin cover
Idler pin
Pump cover
Idler gear
Pump shaft
Bearing bracket
Inner magnetic rotor
Rotor bearing assembly
Separation can
Rotor shaft
Pump casing
3.2Operating principle
As the rotor and idler gear unmesh, an underpressure
is created and the liquid enters the newly created cavities.
Liquid is transported in sealed pockets to the discharge side. The walls of the pump casing and the crescent are creating a seal and separate suction from discharge side.
The rotor and idler gear mesh and liquid is being pushed into the discharge line.
The pump is assembled to be used for flow in one direction.
14 | A.0500.551 – |