Contents
1.0 | Introduction |
| 7 | ||
| 1.1 | General | 7 | ||
| 1.2 | Reception, handling and storage | 7 | ||
|
| 1.2.1 | Reception | 7 | |
|
| 1.2.2 | Handling | 7 | |
|
| 1.2.3 | Storage | 7 | |
| 1.3 | Safety |
| 8 | |
|
| 1.3.1 | General | 8 | |
|
| 1.3.2 | Pump units | 9 | |
|
|
| 1.3.2.1 | Pump unit handling | 9 |
|
|
| 1.3.2.2 | Installation | 9 |
|
|
| 1.3.2.3 Before commissioning the pump unit | 10 | |
|
|
| 1.3.2.4 Disassembly/assembly of the coupling guard | 10 | |
|
|
| 1.3.2.5 Name plate – CE Declaration of Conformity | 10 | |
| 1.4 | Technical conventions | 11 |
2.0 | Pump description | 12 | ||
| 2.1 | Type designation | 12 | |
3.0 | General information and technical data | 14 | ||
| 3.1 | Pump standard parts | 14 | |
| 3.2 | Operating principle | 14 | |
|
| 3.2.1 | 15 | |
|
| 3.2.2 Safety relief valve – Working principle | 15 | |
| 3.3 | Sound | .................................................................................................................. | 15 |
| 3.4 | General performance | 15 | |
| 3.5 | Main characteristics | 16 | |
| 3.6 | Pressure | 16 | |
| 3.7 | Sound level | 16 | |
|
| 3.7.1 Sound level of a pump without drive | 16 | |
|
| 3.7.2 The sound level of the pump unit | 17 | |
|
| 3.7.3 | Influences | 18 |
| 3.8 | Maximum and minimum allowable temperature | 18 | |
| 3.9 | Jacket options | 18 | |
| 3.10 | Internals | 18 | |
|
| 3.10.1 | Bush materials | 18 |
|
| 3.10.2 Maximum temperature of internals | 19 | |
|
| 3.10.3 Operation under hydrodynamic lubrication conditions | 19 | |
|
| 3.10.4 Maximum torque of pump shaft and rotor material combination | 19 | |
| 3.11 | Mass moment of inertia | 20 | |
| 3.12 | Axial and radial clearances | 20 | |
| 3.13 | Extra clearances | 20 | |
| 3.14 | Play between gear teeth | 21 | |
| 3.15 | Maximum size of solid particles | 21 |
A.0500.551 – | 3 |