Installation Notes

ƒThe drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion.

ƒIn order to prevent short-circuit under any circumstances, a space of 0.5mm or more should be kept under the PCB.

ƒSpace should be kept around the drive to avoid any contact with other parts, which may occur due to shock or vibration.

ƒThe temperature of the top cover and the base must always be kept under 60C to maintain the required reliability.

ƒBe sure not to cover the breathing hole to keep the pressure inside the drive at a certain level

ƒDo not apply any force to the top cover, except the screw areas on top cover. Maximum force to the specified area is 2N.

ƒThe drive contains several parts which may be easily damaged by ESD (Electric Static Discharge). Avoid touching the interface connector pins and the surface of PCB. Be sure to use ESD proof wrist strap when handling drive.

ƒThe four mounting screws should be tightened equally with 0.3N-m (3kgf-cm) torque. The depth should be 3.0mm minimum and 3.5mm maximum.

Placing Hard Drive inside your Computer

Determine mounting configuration (the drive can be mounted in either a horizontal or vertical orientation)

Configure drive for system application.

Configure the adapter board for the specific system application (if required).

Install adapter board into an unused PC/AT 16 bit slot (if required).

Install the I/F cable to the system's 44 pin connector port or adapter board. Ensure pin 1 is oriented correctly, (pin 1 on the cable is usually identified by a red or blue strip.)

Set correct drive type in system CMOS

Refer to applicable manuals for software installation instructions.

Important Note: Disconnect power from your computer system before beginning installation.

Figure 2.HDD Mounting Holes

3

Page 5
Image 5
Toshiba MK2016GAP user manual Installation Notes, Placing Hard Drive inside your Computer

MK2016GAP specifications

The Toshiba MK2016GAP is a notable hard disk drive (HDD) that has made its mark in the world of digital storage solutions, particularly for portable computing devices. This drive, which features a 2.5-inch form factor, is designed to cater to the growing need for efficient and compact storage in laptops and other portable devices. Introduced as part of Toshiba’s MK series, the MK2016GAP stands out due to its combination of reliability, performance, and energy efficiency.

One of the main features of the Toshiba MK2016GAP is its storage capacity, which offers 20 GB of data. While this may seem modest by today’s standards, it was a substantial amount during its release period, catering to users who required a reliable means to store operating systems, applications, and personal files. The drive employs a spindle speed of 5400 RPM, striking a balance between good performance and reduced power consumption, making it suitable for use in battery-operated devices.

The construction of the Toshiba MK2016GAP incorporates advanced technologies aimed at enhancing data integrity and operational longevity. It utilizes a fluid dynamic bearing (FDB) for its spindle motor, which significantly reduces vibration and noise during operation. This feature not only promotes a quieter computing environment but also helps prolong the lifespan of the drive by minimizing wear and tear.

Additionally, the drive is engineered with built-in shock protection mechanisms, which guard against potential data loss during sudden movements or impacts. This is particularly advantageous for users who frequently transport their laptops or devices. Furthermore, the MK2016GAP supports Ultra DMA mode, providing efficient data transfer rates that improve overall system performance.

From a compatibility standpoint, the MK2016GAP uses the IDE interface, making it suitable for various devices that support this connection type. This allows for easy integration into older laptops and other systems that may not support more modern SATA drives.

In summary, the Toshiba MK2016GAP exemplifies the attributes of a reliable and efficient hard drive designed for portable computing. Its blend of decent storage capacity, advanced technologies, and robust construction makes it an appealing choice for users in need of dependable data storage solutions. While advancements in technology have introduced larger capacities and faster speeds, the MK2016GAP remains an important element in the evolution of hard disk drives.