Stop jam at the registration sensor

1)Clean the registration roller if it is stained.

2)Is the registration sensor working? (Perform the input check)

*If it is working properly, proceed to 6. If not, check 3 to 5 below.

3)Check if the connector CN74 on the RADF board is disconnected from the registration sensor or the harnesses are open circuited. Correct if any.

4)Replace the registration sensor.

5)Replace the RADF board.

6)Replace the registration roller if it is worn out.

Stop jam at the read sensor

1)Clean the read roller if it is stained.

2)Is the read sensor working? (Perform the input check)

*If it is working properly, proceed to 6. If not, check 3 to 5 below.

3)Check if the connector CN75 on the RADF board is disconnected from the read sensor or the harnesses are open circuited. Correct if any.

4)Replace the read sensor.

5)Replace the RADF board.

6)Replace the read roller if it is worn out.

Stop jam at the exit sensor

1)Clean the exit roller if it is stained.

2)Is the original exit/reverse sensor working? (Perform the input check)

*If it is working properly, proceed to 6. If not, check 3 to 5 below.

3)Check if the connector CN4 on the RADF board is disconnected from the original exit/reverse sensor or the harnesses are open circuited. Correct if any.

4)Replace the original exit/reverse sensor.

5)Replace the RADF board.

6)Replace the exit roller if it is worn out.

RADF jam access cover open

1)Close the RADF jam access cover if it is opened. Remove if there is any original before closing it.

2)Is the RADF jam access cover switch working? (Perform the input check)

*If it is working properly, proceed to 6. If not, check 3 to 5 below.

3)Check if the connector CN72 on the RADF board is disconnected from the RADF jam access cove ropening/closing switch or the harnesses are open circuited. Correct if any.

4)Replace the RADF jam access cover opening/closing switch.

5)Replace the RADF board.

RADF open jam

1)Close the RADF if it is opened. Remove if there is any original before closing it.

2)Is the RADF opening/closing sensor working? (Perform the input check)

*If it is working properly, proceed to 6. If not, check 3 to 5 below.

3)Check if the connector CN75 on the RADF board is disconnected from the RADF opening/clos- ing sensor or the harnesses are open circuited. Correct if any.

4)Replace the RADF opening/closing sensor.

5)Replace the RADF board.

6)Is the RADF opening/closing sensor adjusted within the specified range?

MR-2017/2020	© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved
TROUBLESHOOTING

6 - 4

09/12

MR-2020, MR-2017 specifications

The Toshiba MR-2017 and MR-2020 are innovative microwave ovens that exemplify Toshiba's commitment to advanced cooking technology and user-friendly design. Designed for modern kitchens, these models combine efficiency and versatility, making them ideal for a wide range of cooking tasks.

The MR-2017 features a compact design perfect for small spaces without compromising on power and functionality. It typically boasts a 700-watt microwave output, providing sufficient energy for heating and cooking various dishes. One of its standout features is the one-touch cooking options, which allow users to select heating times and power levels with a simple press of a button. This functionality is particularly advantageous for busy individuals looking to save time in meal preparation.

On the other hand, the MR-2020 offers enhanced capabilities with a slightly larger capacity and a higher wattage output of 800 watts. This model not only heats food but also includes grill and convection settings, allowing for more versatile cooking methods. With the grilling function, users can achieve crispy textures similar to conventional ovens, while convection cooking promotes even heat distribution for consistent results.

Both models are equipped with advanced technology such as the smart sensor cooking feature. This technology automatically calculates the optimal cooking time based on the food type and quantity, ensuring perfectly cooked meals without any guesswork. Safety is also a priority, with child safety locks that prevent accidental operation, making them suitable for families.

The control panel on both the MR-2017 and MR-2020 is designed for ease of use, featuring intuitive buttons and a clear display, making it accessible for all users. Additional features include defrost settings for quick thawing and various pre-set cooking modes tailored for specific food types like popcorn, pizza, and baked potatoes.

In conclusion, the Toshiba MR-2017 and MR-2020 microwave ovens blend advanced cooking technologies with user-friendly features, catering to diverse culinary needs. Their combination of power, safety, and convenience makes them a valuable addition to any kitchen, ensuring that delicious meals are just minutes away. Whether you're reheating leftovers or trying out new recipes, these models are built to deliver performance and satisfaction.

Toshiba MR-2017 Stop jam at the registration sensor, Stop jam at the read sensor, Radf open jam

Models: MR-2020 MR-2017