6.3Jam

Jam not reaching the original registration sensor

1)Clean the pickup roller, feed roller and separation roller if they are stained.

2)Flatten the original if it is folded or excessively curled and place it again.

3)Is the original registration sensor working? (Perform the input check)

*If it is working properly, proceed to 7. If not, check 4 to 6.

4)Check if the connector CN74 on the RADF board is disconnected from the original registration sensor or the harnesses are open circuited. Correct if any.

5)Replace the original registration sensor.

6)Replace the RADF board.

7)Is the original pickup solenoid working?

*If it is working properly, proceed to 12. If not, check 8 to 11.

8)Check if the solenoid is installed at the center of the scale. (The scale is longer in the center.)

9)If it is not, correct the position, aligning with the center of the scale.

10)Check if the connector CN79 on the RADF board is disconnected from the original pickup sole- noid or the harnesses are open circuited. Correct if any.

11)Replace the original pickup solenoid. 12)Replace the RADF board.

13)Replace the pickup roller, feed roller and separation roller if they are worn out.

Feed signal reception jam

1)Is the empty sensor working? (Perform the input check)

2)Check if the lever of empty sensor is working normally.

3)Check if the connector CN75 on the RADF board is disconnected from the empty sensor or the harnesses are open circuited. Correct if any.

4)Replace the empty sensor.

5)Replace the RADF board.

Jam not reaching the read sensor

1)Clean the registration roller and the read roller if they are stained.

2)Is the read sensor working? (Perform the input check)

*If it is working properly, proceed to 6. If not, check 3 to 5 below.

3)Check if the connector CN75 on the RADF board is disconnected from the read sensor or the harnesses are open circuited. Correct if any.

4)Replace the read sensor.

5)Replace the RADF board.

6)Replace the registration roller and the read roller if they are worn out.

Jam not reaching the exit sensor (during scanning)

1)Clean the read roller if it is stained.

2)Is the original exit sensor working? (Perform the input check)

*If it is working properly, proceed to 6. If not, check 3 to 5 below.

3)Check if the connector CN75 on the RADF board is disconnected from the original exit sensor or the harnesses are open circuited. Correct if any.

4)Replace the original exit sensor

5)Replace the RADF board.

6)Replace the read roller if it is worn out.

6

© 2005 - 2009 TOSHIBA TEC CORPORATION All rights reserved

MR-2017/2020

 

TROUBLESHOOTING

6 - 3

09/12

Page 72 Page 74
Page 73
Image 73
Toshiba MR-2020, MR-2017 service manual Jam not reaching the original registration sensor, Feed signal reception jam
Page 72 Page 74

MR-2020, MR-2017 specifications

The Toshiba MR-2017 and MR-2020 are innovative microwave ovens that exemplify Toshiba's commitment to advanced cooking technology and user-friendly design. Designed for modern kitchens, these models combine efficiency and versatility, making them ideal for a wide range of cooking tasks.

The MR-2017 features a compact design perfect for small spaces without compromising on power and functionality. It typically boasts a 700-watt microwave output, providing sufficient energy for heating and cooking various dishes. One of its standout features is the one-touch cooking options, which allow users to select heating times and power levels with a simple press of a button. This functionality is particularly advantageous for busy individuals looking to save time in meal preparation.

On the other hand, the MR-2020 offers enhanced capabilities with a slightly larger capacity and a higher wattage output of 800 watts. This model not only heats food but also includes grill and convection settings, allowing for more versatile cooking methods. With the grilling function, users can achieve crispy textures similar to conventional ovens, while convection cooking promotes even heat distribution for consistent results.

Both models are equipped with advanced technology such as the smart sensor cooking feature. This technology automatically calculates the optimal cooking time based on the food type and quantity, ensuring perfectly cooked meals without any guesswork. Safety is also a priority, with child safety locks that prevent accidental operation, making them suitable for families.

The control panel on both the MR-2017 and MR-2020 is designed for ease of use, featuring intuitive buttons and a clear display, making it accessible for all users. Additional features include defrost settings for quick thawing and various pre-set cooking modes tailored for specific food types like popcorn, pizza, and baked potatoes.

In conclusion, the Toshiba MR-2017 and MR-2020 microwave ovens blend advanced cooking technologies with user-friendly features, catering to diverse culinary needs. Their combination of power, safety, and convenience makes them a valuable addition to any kitchen, ensuring that delicious meals are just minutes away. Whether you're reheating leftovers or trying out new recipes, these models are built to deliver performance and satisfaction.
Top Page Image Contents