LOADING AND UNLOADING A VIDEO CASSETTE

Use only video cassette tapes marked .

LOADING

Push the center of the tape until it is automatically retracted into the TV/VCR.

AUTOMATIC POWER ON AND PLAY

When loading a cassette tape without the erase prevention tab intact, the TV/VCR will turn on automatically and playback will start immediately.

Insert the cassette with its labeled side facing you.

An inverted video cassette cannot be inserted.

ENGLISH

2

UNLOADING

1

1

To unload a video cassette, press the EJECT

button on the remote control, or press the

STOP/EJECT button on the TV/VCR twice. The first press will stop the tape in any mode. The second press will eject the tape.

EJECT

STOP/EJECT

 

OR

AUTOMATIC EJECT

If the TV/VCR automatically rewinds the tape to the beginning (AUTO REWIND FEATURE), the tape will be ejected automatically (See NOTE on page 36).

2 Pull the cassette out.

NOTES: Always eject the tape when not in use.

The cassette tape can be ejected even if the POWER is “OFF”.

29

Page 31
Image 31
Toshiba MV19N3C, MV13N3C owner manual Loading and Unloading a Video Cassette, Automatic Power on and Play, Automatic Eject