Toshiba MW27H62 Setting the digital setup digital mode, Then press Or to select PCM or Dolby

Setting the digital setup (digital mode)

0–7

ENTER

// /

MENU

Selecting the audio language Selecting the digital output format

When two or more audio languages are included in a digital signal, you can select one of the audio languages.

Press MENU in the digital mode, then press
1 or to select	￿￿￿￿￿￿￿￿	￿￿￿￿￿
	option.
	￿￿	￿￿￿￿￿￿
Press or	￿￿￿￿￿￿￿￿￿	￿￿￿￿￿￿￿￿￿￿
	to select “DIGITAL SETUP”, then
2 press .

Press or		￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿		￿￿￿
	to select “AUDIO LANGUAGE”,
3 then press .			￿ ￿￿￿￿￿

4 Press / or Number buttons￿￿￿￿￿￿￿￿￿￿￿￿(0-7) to select desired language, then press￿￿￿￿￿￿￿￿￿￿￿￿ENTER￿￿￿￿￿￿￿￿￿￿.￿￿￿￿

5 Press MENU repeatedly until the menu screen is cleared.

Use this feature to select the digital audio output format when you connect a Dolby Digital decoder or other digital audio system to the coaxial digital audio output on the TV.

1 Follow the left steps 1-2.			TV
Press or	to select “DIGITAL OUTPUT”,		operation
then press	or to select PCM or DOLBY
2 DIGITAL.	￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿	￿￿￿

3 Press MENU repeatedly until the menu screen is cleared.

Checking the digital signal strength

You can check the strength of the digital signal by viewing the digital signal meter.

1 Follow the left steps 1-2.

Press	or to select “SIGNAL METER”, then
2 press	to check the digital signal strength.

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Press MENU repeatedly until the menu screen

3 is cleared.

Notes:

• Signal meter feature is not available for analog channels.

• After approximately 4 minutes, SIGNAL METER screen will return to normal TV-operation automatically.

• When you select a vacant channel, the signal meter may

react.

39

5V60101A [E]p30-39 39 2/22/06, 1:05 PM