Troubleshooting Procedures
TECRA A11/S11/P11/Satellite Pro S500 Series Maintenance Manual (960-784) [CONFIDENTIAL] 2-29
F116 S3 shift start
RAM CN1400, CN1410 (RAM
Conn.)
F117 S4 shift start RAM CN1400, CN1410 (RAM
Conn.)
F118 S5 shift start RAM CN1400, CN1410 (RAM
Conn.)
F119 USB electric supply setting
start
PCH
EC
IC1600 (PCH)
IC3200 (EC/KBC)
F11A Completion of a USB
electric supply setting
PCH
EC
IC1600 (PCH)
IC3200 (EC/KBC)
F11B Shutdown processing RAM CN1400, CN1410 (RAM
Conn.)
F11C Completion of Shutdown
processing RAM CN1400, CN1410 (RAM
Conn.)
F11D S3 return service start BIOSROM
RAM
IC3000/IC3002 (BIOS
ROM), CN1400, CN1410
(RAM Conn.)
F1FF End of S3 return processing.
Shifts to OS. RAM CN1400, CN1410 (RAM
Conn.)
NOTE: Status outputted by the test means the last error detected in the debug port test.
Check 1 If the D port is status F11Eh or F120h is displayed, go to “HDD Trouble shooting Procedure in Section 2.6. Check 2 If any other D port status error code is displayed, perform Procedure 3. D port error code is as follows:
Error code Contents
F003h or F004h SC initialization error
F00Bh BIOS update error
F117h Exception check error
F121h Clock generator error