Replacement Procedures
Satellite P300 and Satellite Pro P300 Maintenance Manual (960-Q08)
4-17
4.5 HDD Removing second HDD-H9.5mm / HDD-H12.5mm
The following describes the procedure for removing the second HDD (See Figure 4-3 to 4-4).
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
4. Turn the computer upside down.
5. Remove the following screws securing a HDD slot cover and remove a HDD slot
cover.
• M2.5×4.0B FLAT BIND screw x2
6. Remove the following screws securing the HDD assembly.
• M2.5×5.0B FLAT BIND screw x2
7. Disconnect the HDD assembly from the connector on the system board.