Main Menu page

From normal mode, [MENU] button will guide to this page.

Display Menu page

After entering Main Menu, [ENTER] will display this page. To escape from the mode, use [Exit].

In this Display Menu page, DISPLAY, IMAGE, POSITION, COLOR or PIP CONTROL can be selected. Most of them are picture quality or adjustment related.

Once entered to the any mode, such as above right, DISPLAY Menu mode, note that the highlighted

section is selected. This picture indicates that [Down] button is used so that Flesh-Tone is also highlighted. To change or adjust the value, [Up]/[Down] or [Left]/[Right] key will do for selection. Normally, [Up]/[Down] are for adjustment item selection and [Left]/[Right] are for value change.

As for the adjustment, RGB PC signal, Y-Cb-Cr signal or Video signal, some adjustments are different from the one to the other by different input selection.

When going out from this mode for example, above right picture, in Flesh-Tone adjustment, [Exit] key needs to be used, then the picture will be below left.

While in this Display Menu mode, if [Right] key is used, then it will become as above right picture, the Image Menu mode.

In this page, by using [Down] key, there are selections of Scaling, Auto Adjust, Phase and Clock selection/ adjustment.

20

Page 20
Image 20
Toshiba P47LSA owner manual Main Menu, Display Menu