Always copy data from the hard disk drive to the optical media - do not use the cut-and-paste function as the original data will be lost if there is a write error.

Do not perform any of the following actions: Change users in the Operating Systems.

Operate the computer for any other function, including such tasks as using a mouse or Touch Pad, or closing/opening the display panel.

Start a communication application.

Apply impact or vibration to the computer.

Install, remove or connect external devices, including such items as a memory media card, USB device, external monitor or an optical digital device.

Use the audio/video control button to reproduce music or voice.

Open the optical disc drive.

Do not use shut down, log off, Sleep Mode or Hibernation Mode functions while writing or rewriting.

Make sure that the write/rewrite operation is completed before going into either Sleep Mode or Hibernation Mode (You can remove an optical media on the optical disc drive after writing is completed).

If the media is of poor quality, or is dirty or damaged, writing or rewriting errors may occur.

Set the computer on a level surface and avoid places subject to vibration such as airplanes, trains or cars. In addition, do not use the computer on an unstable surface such as a stand.

Keep mobile phones and other wireless communication devices away from the computer.

TOSHIBA VIDEO PLAYER

Please be aware of the following limitations when you use the TOSHIBA VIDEO PLAYER:

Notes on use

This software can only be used on Windows 8.

TOSHIBA VIDEO PLAYER software is supported for playback of DVD and video file.

Frame dropping, audio skipping or out of sync audio and video may occur during playback of some video titles.

Close all other applications when using the TOSHIBA VIDEO PLAYER. Do not open any other applications or carry out any other operations during video playback. Playback may stop or not function properly in some situations.

Unfinalized DVDs created on home DVD recorders may not be playable on the computer.

Use DVD-Video discs with a region code which is either "the same as the factory default setting" (if applicable) or "ALL".

User's Manual

4-12