Installing a memory module

To install a memory module, follow the steps as detailed below:

1.Click Power in the Settings charm, and then click Shut down while holding down the SHIFT key - ensure that the Power indicator is off.

2.Remove the AC adaptor and all cables and peripherals connected to the computer.

3.Close the display panel.

4.Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section, if required).

5.Loosen the screw securing the memory module cover in place - please note that the screw is attached to the cover in order to prevent it from being lost.

6.Slide your fingernail or a thin object under the cover and lift it off.

Figure 4-13 Removing the memory module cover

1

 

2

1. Memory module cover

2. Screw

Product appearance depends on the model you purchased.

User's Manual

4-42