System LCD Only Selects the internal LCD, even if an external monitor is connected.

Boot

This tab allows you to modify the boot settings.

Boot Priority Options

This option allows you to set the priority for booting the computer. Click the Up and Down buttons to adjust the priority.

To change the boot drive, follow the steps below.

1.Hold down F12 and boot the computer. Release the F12 key one second after the computer is power on.

2.Use the up and down cursor keys to select the boot device you want and press ENTER.

If your computer does not load the Boot menu, please refer to the Troubleshooting section.

If a Supervisor Password has been set, manual boot device selection functions may be restricted.

The boot device selection methods described above will not change the boot priority settings that have been configured in TOSHIBA System Settings. In addition, if you press a key other than one of those listed, or if the selected device is not installed, the system will continue to boot according to the current and available settings in TOSHIBA System Settings.

Boot speed

This option allows you to select system boot-up speed.

Fast

Reduces system boot-up time. System can boot

 

only from the built-in HDD and only internal LCD

 

and keyboard are supported during the boot

 

process.

 

 

Normal

System boots up at normal speed.

 

 

Panel Open - Power On

This option allows you to change the Panel Open - Power On setting.

Enabled

Enables the Panel Open - Power On function.

 

When you open the display panel while your

 

computer is turned off, the system will boot up

 

automatically.

Disabled

Disables the Panel Open - Power On function.

 

 

User's Manual

5-13