20

Chapter 1

Setting Up the dynadock™ and Connecting Peripherals

Setting up the dynadock™

This section provides instructions on setting up the dynadock™.
You will need to perform the following steps in the order shown:
1Assemble the dynadock™
2Connect the power adaptor
3Install the software
4Connect the dynadock™ to your computer
You may either:
aSet up a wireless connection
OR
bSet up a USB cable connection
For more information on each step, refer to the appropriate section
on the indicated page.
Assemble the dynadock™
Slide the dynadock™ onto the base as shown below.
(Sample Illustration) Attaching the base to the dynadock™