27
Setting Up the dynadock™ and Connecting Peripherals
Setting up the dynadock™
8After successfully completing the association, remove the USB
cable connecting the computer to the dynadock™.
After a few moments, a wireless connection is established and
a message displays on your computer screen asking if you want
to dock your computer.
Connecting opens a line of communication between the computer
and the dynadock™, but not between the computer and external
devices connected to the dynadock™.
Docking enables the computer to communicate with devices
connected to the dynadock™. The computer can only be docked with
one dynadock™ at a time.
For optimal performance, the dynadock™ must be within close range
of the adaptor, with no obstructions between the devices.
(Sample Image) Click Yes to dock wirelessly to your computer
9Click Yes to dock your computer.
10 The dynadock™ drivers automatically install. Restart your
computer when prompted.
Restarting may take longer than usual if the computer's operating
system is configured to create a system restore point after a new
device is installed. This occurs after initial installation only. When
the computer restarts, the dynadock™ is ready to use.
NOTE
NOTE
NOTE