Toshiba PRO500 4.11 Cover assembly

Replacement Procedures

4.11 Cover assembly

Removing the cover assembly

The following describes the procedure for removing the cover assembly (See Figure 4-11-1

to 4-11-3).

1. Turn over the computer.

2. Remove the following screws securing the cover assembly from the back and bottom

of computer.

• M2.5×2.0 FLAT BIND screw Back x5

• M2.5×6.5 FLAT BIND screw Back x11

• M2.5×8.0 FLAT BIND screw Back x6

• M2.5×4.0 FLAT BIND screw Back x3

Figure 4-11-1 Remove the screws (back)

Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)

4-3