Chapter 4 Replacement Procedures
4.11 I/O Board The following describes for removing the I/O Board (See Figure 4-11-1).
Removing the I/O Board
1. Pull out the I/O Board FFC from I/O board connector.
2. Loose the below screws and then incline pull out I/O Board.
M2.0x3.0 FLAT BIND screw x1
Figure 4-11-1 Remove the I/O Board
Satellite L640/L645, Satellite Pro L640/Pro L645 Maintenance Manual (960-Q08)
4-39