Error! Style not defined. Error! Style not defined. 4 Replacement Procedures
4.20 CMOS Board and MIC Removing the CMOS Board and MIC
Remove the CMOS Board and MIC according to the following procedures and Figure 4.45.
1. Disconnect the CMOS cable from the CMOS module connector an the CMOS
board. d remove
Figure 4.45 Removing the CMOS board and MIC
2. Lift the MIC cable from the LCD cover assembly.
Installing the CMOS Board and MIC
Install the CMOS Board and MIC according to the following procedures.
1. Connect the CMOS module cable to CMOS module connector.
2. Seat the CMOS module and MIC in the correct position on the LCD cover assembly.
Satellite L500 Maintenance Manual 4-55