Toshiba PROA500 3.1 The Diagnostic Test

3. Tests and Diagnostics
Satellite L500 / Pro L500 Series Maintenance Manual 3
3.1 The Diagnostic Test
This chapter explains how to use the Test & Diagnostic program to test the functions of the
(Base on Liveropool 10M/10MG T&D version 1.0) hardware modules. The Test & Diagnostic
Program is stored on the T&D diskettes. The program consists of a series of tests that run
automatically when the Diagnostics Program items are selected and executed.
NOTES: To start the diagnostics, follow these steps
1. Check all cables for loose connections.
2. Exit this program when you are at Main Menu.
The TEST & DIAGNOSTIC PROGRAM contains the following functional tests:
 CONFIG CHECK TEST
 Audio sound TEST
 FAN ON/OFF TEST
 MAIN BATTERY CHARGE TEST
 FDD TEST
 Memory check
 KEYBOARD TEST
 MOUSE(PAD) TEST
 LCD PIXELS MODE TEST
 MAGNETIC SWITCH TEST
 LAN TEST
 RTC TEST
 BUTTON TEST
 1st HDD Test
 RDMI Test
 WDMI Test
 HDCP KEY CHECK
You will need the following equipment to perform some of the Diagnostic test programs.
 The diagnostics USB disk
 A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test)
 A LAN loopback