If a Supervisor Password has been set, manual boot device selection functions may be restricted.

The boot device selection methods described above will not change the boot priority settings that have been configured in HW Setup. In addition, if you press a key other than one of those listed, or if the selected device is not installed, the system will continue to boot according to the current and available settings in HW Setup.

Boot speed

This feature allows you to select system boot-up speed.

Fast

Reduces system boot-up time. System can boot

 

only from the built-in HDD and only internal LCD

 

and keyboard are supported during the boot

 

process.

 

 

Normal

System boots up at normal speed. (Default)

 

 

Panel Open - Power On

This feature allows you to change the Panel Open - Power On setting.

Enabled

Enables the Panel Open - Power On function.

 

When you open the display panel while your

 

computer is turned off, the system will boot up

 

automatically.

 

 

Disabled

Disables the Panel Open - Power On function.

 

(Default)

 

 

The Panel Open - Power On feature is supported with some models.

Keyboard

This tab allows you to set conditions for the Keyboard.

Function Keys mode (without pressing FN first)

This feature allows you to configure the Function Keys Mode. For the Hot key functions can be performed, please refer to the Hot keys section in Chapter 3, Operating Basics.

Special function Press the function key by itself to use special

modefunctions. Hold FN first to use standard F1-F12 functions.

Standard F1-F12Press the function key by itself to use standard

modeF1-F12 functions. Hold FN first to use special functions.

User's Manual

4-18