4.7 Display Assembly 4 Replacement Procedures
M2 5x7 black flat head screw.
LCD FL cable CCD cable
MIC cable Wireless LAN antenna
CN5
CN7
CN13
Figure 4-15 Removing the display assembly
Installing the Display Assembly and ODD Extended Board
Install the display assembly according to the following procedures and Figures 4-14, 4-15.
1. Place the display panel in the correct position and push the wireless antenna cable,
CCD cable and MIC cable into the bottom cover.
2. Connect the LCD/FL cable to CN5 on the system board.
3. Connect the CCD cable to CN7 on the system board.
4. Connect the MIC cable to CN13 on the system board.
5. Secure the display assembly with four M2.5x7 black flat head screws.
6. Close the display panel and turn the computer so the back is facing you and secure
two M2.5x7 black flat head screws.
Satellite L350D/ Satellite Pro L350D/ EQUIUM L350D/ SATEGO L350D Maintenance Manual 4-31