121
If Something Goes Wrong
Wireless networking problems❖If another device is on the same network, verify that it
has network access, and can connect to the Internet. If,
for example, the other device cannot browse to a public
Web site, the ISP’s (Internet Service Provider) service
may be disrupted.
❖Verify that the Service Set Identifier (SSID), or network
name, is correct - i.e., that it matches the SSID assigned
to the access point you are attempting to connect
through. SSIDs are case-sensitive.
❖Check the Windows® Control Panel's Device Manager to
verify that the Wi-Fi® adapter is recognized by the
Windows® operating system, and that the driver is
loaded. To access the Device Manager, from the Start
screen begin typing Computer. If you are in the
Desktop screen, move your pointer to the upper-right
corner of the screen or swipe in from the right edge.
When the Windows® charms appear click or touch the
Search ( ) charm, and then type Computer. Click or
touch Control Panel, System and Security, and then
System. Carefully note any error messages - these will
be very helpful if you should confer with a support
technician at a later time.
To enable or disable wireless communication, use the
F12 key. For more information see “TOSHIBA Function
Keys” on page 129.
❖Use IPCONFIG to verify that the device has a useful IP
address - one other than the private address of
169.254.xxx.xxx assigned by Windows®.
1From the Start screen, type Cmd.
2Click Command Prompt.
3Enter IPCONFIG/ALL, and then press ENTER.
The IP address for each active network adapter will be
displayed.
❖Connect your device directly to your router or broadband
modem, by plugging a standard CAT5 Ethernet patch
cable (sold separately) into your device's RJ45 Ethernet
port. If your connection problem disappears, the
problem lies in the Wi-Fi® part of your network.
NOTE