Toshiba PWU001Z-1 Names and functions of main parts, Parameter Writer, Remote Keypad, E6580724

E6580724

2. Names and functions of main parts

PARAMETER WRITER lamp When the parameter writer is set for the original function to write parameters, this lamp is on.

REMOTE KEYPAD lamp When the parameter writer is set to function as a remote keypad, this tamp is on.

SFT keys for parameter writer function

(Refer to the following table.)

UP and DOWN keys for emote keypad function

(Refer to the following table.)

RUN		MON
VEC
ECN		PRG
	PARAMETER WRITER
	REMOTE KEYPAD
Ａ	Ｂ	Ｃ
ＲＵＮ	ＳＴＯＰ	ＭＯＮ
ＳＦＴ	ＥＳＣ	ＥＮＴ
△	▽

LED display

Shows data and other indications.

Keys for parameter writer function (Refer to the following table.)

Keys for remote keypad function

ENT key common to parameter writer function and remote keypad function (Refer to the following table.)

Communication connector

■Operation keys and their functions

(Functions of operation keys explained in the following table are in the condition that the parameter writer is used for the original purpose to copy, write, compare and protect data. When the parameter writer is used as a remote keypad, respective operation keys function as same as operation keys on the inverter. For details of those functions, refer to the operation manual of the inverter.)

Operation		Function
key
		Memory A key
	Ａ	(Exclusive key for simply copying)
		In the simply copying function, this key is
	ＲＵＮ	used to specify the memory A of the
		parameter writer as the origin to transmit
		data. (In remote keypad function: RUN key)

Memory B key

Ｂ(Exclusive key for simply copying)

	In the simply copying function, this key is
ＳＴＯＰ	used to specify the memory B of the
	parameter writer as the origin to transmit
	data. (In remote keypad function: STOP key)
	Memory C key
Ｃ	(Exclusive key for simply copying)
	In the simply copying function, this key is
ＭＯＮ	used to specify the memory C of the
	parameter writer as the origin to transmit
	data. (In remote keypad function: MON key)

Operation		Function
key
		SFT key
		To be used for selecting a function
	ＳＦＴ (copying, comparing, protecting data) or
		for selecting a memory (from among

△inverter's memory, memory A, B and C of parameter writer).

(In remote keypad function: UP key) ESC key

ＥＳＣ	To be used to return to the status one
	before. (In remote keypad function:

▽DOWN key)

ENT key

To be used to decide a function or memory

ＥＮＴ	or to execute the decided function.
	(In remote keypad function: ENT key)

- 5 -