Operating Basics

You can set the orientation of the desktop screen just after rotating the display from [Start]-[All Programs]-[TOSHIBA]-[Tablet PC]-[TOSHIBA Rotation Utility]

Changing to the laptop mode

To change the Tablet mode to the laptop mode, follow the instructions below.

1.Press the Display latch and raise the display to the upright position carefully.

2.Rotate the display counter-clockwise slowly.

3.Turn the display latch toward you for the next closing of the display.

Using the USB floppy disk drive (optional)

An optional USB floppy disk drive connects to one of the computer’s USB ports. It accommodates 1.44-megabyte or 720-kilobyte floppy disks. Refer to Chapter 2, The Grand Tour, for more information.

Connecting the USB floppy disk drive

To connect the drive, plug the floppy disk drive’s USB connector into a computer’s USB port.

Make sure the connector is right side up and properly aligned with the socket. Do not try to force the connection, doing so can damage the connecting pins.

USB

CONNECTOR

USB PORT

Connecting the optional USB floppy disk drive

If you connect the USB floppy disk drive after turning on the computer, it will take about 10 seconds for the computer to recognize the drive. Do not disconnect and reconnect before 10 seconds has elapsed.

Satellite R10

4-12