4.30 Fluorescent Lamp 4 Replacement Procedures
Attaching the cover bottom, screw, top case, control PCB and FPC
11. Attach the bottom cover and screw (1).
CAUTION: Pressure should not be given on the source TCP.
12. Attach the top case (2).
CAUTION: Pressure should not be given on the gate TCP.
13. Attach the control PCB (3).
CAUTION: Move the control PCB to the right.
14. Attach the FPC cable (4) used for the control PCB connecting.
CAUTION: Pressure or stress should not be given on the FPC cable.
Screw:1STZL-0001H
Case Assembly:
3111L-00070A
Control PCB:6870L-C017
Screw:1STZL-0001H
Figure 4-174 Attaching the cover bottom, screw, top case, control PCB and FPC
Satellite A20 Maintenance Manual (960-444) 4-217