Connections
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see 33 .
Connecting to a TV
Signal flow
| VIDEO OUT | AC IN | ||
VIDEO | Y | PB | PR | |
|
|
| AUDIO OUT | |
S | R | L | BITSTREAM/ | |
ANALOG | PCM | |||
|
To S VIDEO | (yellow) | (red) (white) | To wall outlet |
OUT |
|
| |
|
|
| |
| To VIDEO | To ANALOG AUDIO OUT |
|
| OUT |
|
|
|
| Audio/video cable (supplied) |
|
|
|
| To audio inputs |
|
| To video input | (red) (white) |
|
| (yellow) |
S video cable (not supplied) | To S video input |
If the TV has an S video input, connect the DVD video player with an S video cable. When using an S video cable, do not connect the yellow video cable.
Explanation of plug adapter (supplied):
The plug is provided with parallel type pins. However, when using a power outlet of different type, use the plug adapter.
Plug adapter
Plug with parallel pins
TV or monitor with audio/video inputs
• Make the following setting.
Select: | Page |
“Audio Out Select” “Analog 2ch” 35
39
Notes
•Refer to the owner’s manual of the connected TV as well.
•When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections.
•If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect to your TV.
•Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or video selector, the playback picture may be distorted as DVD video discs are copy protected.
16