Philips SBC RU240/00U manual Sbc Ru, Instructions for use, RU 240- page, Using The Aux Button

Models: SBC RU240/00U

1 48
Download 48 pages 48.62 Kb
Page 6
Image 6
READING OUT THE 4-DIGIT BRAND CODE

RU 240- page 6

English

SBC RU 240

Instructions for use

READING OUT THE 4-DIGIT BRAND CODE

After using autosearch to set up the remote control, note the 3-digit code for future use.

1.Press the device button of the device you want to read the code from.

2.Press and release keys 1 and 6 simultaneously.

Important: after pressing the keys, you have to release them immediately!

The indicator LED lights up.

3.Press -/--;

The LED indicator goes out.

4.Press 1:

the indicator starts to blink; Count the number of blinks for the first digit. Note: if the indicator does not blink, the digit is 0.

5.Press 2:

the indicator starts to blink; Count the number of blinks for the second digit.

6.Press 3:

the indicator starts to blink; Count the number of blinks for the third digit.

7.Press 4:

the indicator starts to blink; Count the number of blinks for the fourth digit.

8.Write down the code inside the remote's battery lid.

USING THE AUX BUTTON

The AUX button can be used to control a second TV, VCR or SAT receiver. The AUX button is pre-installed for a second video recorder. If you want to operate a second TV instead, proceed as follows:

1.Press and hold 1 and 6 at the same time for 3 seconds.

– The indicator LED lights up.

2.Enter 9,9,2

3.Press TV

4.Press AUX

Now follow the procedures in the Chapter SETTING UP BY CODE ENTRY to enter the code for your second TV.

If you want to operate a second SAT receiver with AUX, in step 3 press SAT (instead of TV), and use the SAT code list to find the brand code.

TELEPHONE HELP-LINE

If you have any problems with your Philips Universal remote control, please ring our telephone help-line.

United Kingdom: 0207 7440344

Ireland: 01 6011158

Before calling, note the data of your equipment in the table below. This makes it easier and faster for us to help you.

Type-numbers can usually be found in the original manual, or on the factory plate on the back of the equipment.

Device

Brand

Model nr.

RC model nr.

Used code

TV

 

 

 

 

VCR

SAT

AUX

6

Page 6
Image 6
Philips SBC RU240/00U Sbc Ru, Instructions for use, RU 240- page, READING OUT THE 4-DIGITBRAND CODE, Using The Aux Button