Connecting to an audio system and TV equipped with component video inputs

Signal flow

 

VIDEO OUT

AUDIO OUT

AC IN

VIDEO

Y

PB

PR

 

S

R

L

COAXIAL OPTICAL

 

ANALOG

BITSTREAM/PCM

 

 

 

Connections

(red)

(white)

 

To wall outlet

 

To PR

To PB

To Y

To ANALOG AUDIO OUT

VIDEO

VIDEO

VIDEO

 

OUT

OUT

OUT

To audio inputs of

 

 

 

the amplifier

 

 

 

(red)

(white)

 

To Y video input

 

 

 

 

 

To PB video input

 

 

 

To PR video input

Audio system

 

TV or monitor with

 

 

 

component video inputs

Component video (ColorStream® ) outputs/inputs

Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.

• Make the following setting.

On-screen display

Select:

Page

Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)

In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.

Notes

“Audio Out Select” “Analog 2ch”

38

40

Refer to the owner’s manual of the connected equipment as well.

When you connect the DVD video player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.

If you place the DVD video player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD video player away from the tuner and radio.

The output sound of the DVD video player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.

Turn off the amplifier before you connect or disconnect the DVD video player’s power cord. If you leave the amplifier power on, the speakers may be damaged.

17