Function setup

Customizing the Function Settings (continued)

Setting details

(Continued)

When you select “Analog 6Ch”:

Make the following settings for the built-in 5.1ch surround decoder.

 

ABC

Analog 6ch

 

C. S. Speaker Size

Large

C (Center) Speaker

On

S (Surround) Speaker

On

Subwoofer

On

Center Channel Delay

0msec

Adjusting the delay time:

When enjoying 5.1ch surround playback, it is ideal to choose a listening position that is the same distance from each speaker. By adjusting the delay time of the center/surround speakers, you can virtually create an ideal listening environment (as if the center/surround speakers were at their ideal locations respectively as below.)

Ideal location of a center speaker

Surround Channel Delay 5msec

Test Tone

1) Select an item by moving the cursor control ( / ), and press the ENTER button.

2) Make the settings (see below) by moving the cursor control, and press the ENTER button.

C.S.Speaker Size

(A)

FLFR

Dc

SWDf

 

Ds

 

SL

SR

(B)

 

All speakers should be located within a circle with a radius of Df.

Ideal location of a surround speaker

Small: When the center speaker or surround speakers cannot reproduce low frequency signals below 120 Hz.

Large: When the center speaker and surround speakers can reproduce low frequency signals below 120 Hz.

C(Center) Speaker

Off: When center speaker is not connected.

On: When you connect center speaker.

S(Surround) Speaker

Off: When surround speakers are not connected.

On: When you connect surround speakers.

Subwoofer

Off: When a sub woofer is not connected.

On: When you connect a sub woofer.

Note

Depending on the sound in a DVD audio disc, speakers may output each sound of recorded channels, regardless of your settings.

Center Channel Delay

0msec: When Df equals Dc.

1msec: When (A) is approx. 34 cm (13 inch)

2msec: When (A) is approx. 68 cm (27 inch)

3msec: When (A) is approx. 102 cm (40 inch) . . .

*(A) = Df – Dc

Get your optimum value (0, 1, 2 . . . 5) dividing (A) by 34.

Surround Channel Delay

0msec: When Df equals Ds.

1msec: When (B) is approx. 34 cm (13 inch)

2msec: When (B) is approx. 68 cm (27 inch)

3msec: When (B) is approx. 102 cm (40 inch) . . .

*(B) = Df – Ds

Get your optimum value (0, 1, 2 . . . 15) dividing (B) by 34.

Note

Depending on the sound in a DVD audio disc, the DVD player may adjust delay time as “0msec,” regardless of your delay time settings.

60