INTERLACED outputs/inputs (ColorStream® )
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher quality picture playback.
Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y,
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a case, adjust the TV or monitor for optimum performance.
PROGRESSIVE outputs/inputs (ColorStream® Pro) Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
|
| VIDEO OUT |
|
| AUDIO OUT | |
|
| VIDEO | Y | PB | PR | BITSTREAM |
|
|
|
|
|
| /PCM |
SELECT |
|
|
|
|
| |
I | P | S | R | L | COAXIAL OPTICAL | |
|
|
| ANALOG | DIGITAL |
(red) | (white) |
|
|
| To PR | To PB | To Y |
| VIDEO | VIDEO | VIDEO |
| OUT | OUT | OUT |
Signal flow
To wall outlet
Connections
To audio inputs of the amplifier
(red) | (white) |
Audio system
To Y video input
To PB video input
To PR video input
TV or monitor equipped | SELECT | Set to | ||||||||||||
with component video | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
| ||||
(INTERLACED) inputs | I |
|
|
|
|
|
|
|
| P | “I.” | |||
|
|
|
|
|
|
|
| |||||||
|
|
|
|
| ||||||||||
or |
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
TV or monitor equipped | SELECT | Set to | ||||||||||||
with component video |
|
|
|
|
|
|
|
|
|
|
| “P.” | ||
(PROGRESSIVE) inputs | I |
|
|
|
|
|
|
|
|
| P | |||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Switching the output signal (interlaced/ progressive) using the remote control
(only when the SELECT (I/P) switch is set to “P”)
You can temporarily switch the output signal for better picture quality.
Press PROGRESSIVE on the remote control.
While the DVD player is outputting progressive signals, the indicator on the right side on the front panel illuminates.
*After setting this switch (I/P), be sure to power off the DVD player then turn it on to activate the setting.
• Make the following setting.
Select: | Page |
“Bitstream” 56
“Digital Output” or
“PCM” 59
Notes
•Refer to the owner’s manual of the connected equipment as well.
•When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
•If you place the DVD player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD player away from the tuner and radio.
•The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
•Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the speakers may be damaged.
•The S VIDEO OUT jack and the VIDEO OUT jack cannot output video signals simultaneously, if you select progressive signal when the SELECT (I/P) switch is set to “P.”
19