Toshiba SD-P1707SR owner manual Make the following setting

CAUTION

• When you are connecting (via the BITSTREAM/PCM

jack) an AV decoder that does not have Dolby Digital,

Digital Theater Systems (DTS) or MPEG2 decoding

Connecting to an audio system equipped

with analog audio inputs

function, be sure to set “Digital Out” to “PCM” from the

on-screen displays 58 . Otherwise, high volume sound

may damage your hearing as well as the speakers.

• When playing DTS-encoded discs (audio CDs),

excessive noise may be output from the analog audio

To AV OUT

Signal flow

To analog audio inputs

output jacks. To avoid possible damage to the audio

system, you should take proper precautions when the

analog audio output jacks of the player are connected to

an amplification system. To enjoy DTS Digital Surround®

playback, an external 5.1 channel DTS Digital Surround®

decoder system must be connected to the BITSTREAM/

PCM jack of the player.

Audio/video cable (supplied)

Red (Right) AUDIO IN	Audio system
R

L

White (Left)

Yellow (Video)

No need to connect.

Note

•DO NOT connect the BITSTREAM/PCM jack of the player to the AC-3 RF input of a Dolby Digital Receiver. This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the BITSTREAM/PCM jack of the player.

Make the following setting.

Setting	Select:	Page
“Digital Out”	“Analog 2ch”	58

Connections

65