22
TV Operation
Channel Menu OptionsMemorizing the Channels with
Auto Scan
Press the SET UPbutton and then use the DD / EE buttons
to select the Channelmenu.
1
- For Auto program to work, the programming source must be
connected to the TV and the TV must be receiving
programming signals either over-the-air or from a
cable-type service provider.
Press the GGbutton and then use the DD / EE buttons
to select Auto Scan.
2
Press the GGbutton to begin the channel search.
• Wait for auto program to complete the channel
search cycle before choosing a channel. The
TV scans for over-the-air channels and then
channels provided by a cable service.
3
Channel
To start
Auto Scan
Manual prog.
Favorite ch.
TV/Cable
FG
ENTER SETUP
D
E
Note:
• When the channel search is complete, use the DD / EE
buttons to review the memorized channels.
• If you press the ENTER button in auto programming, the
function will stop and only channels programmed up to
that time will remain.
• Auto programfunction can memorize only the channels
which are being received at that time.
Channel
Auto Scan
Manual prog.
Favorite ch.
TV/Cable
FG
ENTER SETUP
D
E
SET UP
DD / EE, FF / GG
ENTER
Antenna Setup
Press the SET UPbutton and then use the DD / EE buttons
to select the Channel menu.
1
Press the GGbutton and then use the DD / EE buttons
to select TV/Cable.
2
Press the GGbutton and then use the DD / EE buttons
to select TV or CATV.
3
Channel
Auto Scan
Manual prog.
Favorite ch.
TV/Cable
F
ENTER SETUP
D
E
Channel
Auto Scan
Manual prog.
Favorite ch.
TV/Cable
FG
ENTER SETUP
D
E
Press the ENTER button to save.
4
TV
CATV