Drive Connectors SD-R1312 | Toshiba manual

DRIVE CONNECTORS – SD-R1312

Power	Power is supplied to your DVD drive by the connection with your computer's +5V/+12V
Connector	power cable to the power socket at the back of drive. One side of the plug has chamfered
	edges, so the power connector fits only one way

CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in upside-down with power ON

Audio	Supplies Analog and Digital sound to your system.
Connectors
ATAPI	The SD-R1312 DVD drive is connected to your computer system through the ATAPI
Connector	connector
Mode	The mode select jumpers are 6 straight angle pins located on the rear of the DVD drive.
Select	By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
Jumper	(Slave) or MA (Master). (see Setup for additional information).