Toshiba SD120/220 manual Dolby Digital, Dolby Pro Logic Surround

Connecting to an amplifier equipped with a Dolby Digital decoder

Dolby Digital

Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. You can enjoy motion picture and live concert DVD video discs with this dynamic realistic sound by connecting the DVD video player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby Surround mark.

Amplifier equipped with a			VIDEO OUT		AUDIO OUT
Dolby Digital decoder		VIDEO	Y PB PR
To OPTICAL	To COAXIAL	S	R	L	COAXIAL OPTICAL
			ANALOG		BITSTREAM/PCM
type digital	type digital				Connect either.
audio input	audio input

75 Ω coaxial cable Optical digital cable

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved.

•Use DVD video discs encoded via the Dolby Digital recording system.

•Make the following setting.

On-screen display	Select:	Page
“Audio Out Select”	“Bitstream”	48
		51
Recording system	D	43

Connections

Connecting to an amplifier equipped with Dolby Pro Logic Surround

Dolby Pro Logic Surround

You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left front speakers, a

• Make the following setting.

On-screen display Select: Page

center speaker, and one or two rear speakers).

“Audio Out Select” “Analog 2ch”

48

With an amplifier equipped with Dolby Digital

Connect the equipment the same way as described in “Connecting to an amplifier equipped with a Dolby Digital decoder.” Refer to that amplifier’s owner’s manual and set the amplifier so you can enjoy Dolby Pro Logic Surround sound.

With an amplifier not equipped with Dolby Digital

Connect the equipment as follows.

*	Amplifier equipped with		VIDEO OUT	AUDIO OUT
	Dolby Pro Logic Surround	VIDEO Y PB PR
	To audio input	S	R L	COAXIAL OPTICAL
			ANALOG	BITSTREAM/PCM

To ANALOG AUDIO OUT

Audio cable

51

Be sure to set “Audio Out Select” to “Analog 2ch” when you enjoy sounds of Dolby Pro Logic Surround using this connection.

*Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers.

21