•If you attempt to enter a number greater than the total time of the disc or current title, it clears the numbers entered and waits for you to enter again.
•If you wait ten seconds without pressing any key for selecting scenes, the operation is cancelled.
Accessing tracks using number buttons:
You can play any track you want, just by pressing the corresponding number button.
For the track numbers which are greater than “9” use +10 button. Each press increases the number by 10.Then type the second digit of track number.
If you attempt to enter a number greater than the total number of tracks on disc, ´ 
symbol appears on
∞NOTE:
•This operation is available only when PBC is off.(See Page 20).
Repeat Play
Press PLAY MODE during playback.
Each time this button is pressed, a different repeat box is displayed on the screen.
If “REPEAT TRACK” is displayed, the current track will be played again.
If “REPEAT ALL” is displayed, the whole disc will be played again.
If “REPEAT OFF” is displayed, the repeat mode is disabled.
∞NOTE:
Repeat Modes are available only when PBC is off.(See Page 20)
Repeating sections between two specific points.(A
– B repeat)
Press
“A TO B SET A” is displayed on screen.
Press
“A TO B SET B” is displayed and the
To return to normal play:
Press
∞NOTE:
•If you give up entering the point B after entering A simply press RETURN, and the operation is cancelled.
Convenient Functions
Displaying the time information
Press TIME during playback.
Each time this button is pressed, a different time information box is displayed on the screen.
If “SINGLE ELAPSED” is displayed, the VFD display on the unit shows the elapsed time for the track which is being played
If “SINGLE REMAIN” is displayed, the VFD display on the unit shows the remaining time for the track which is being played
If “TOTAL ELAPSED” is displayed, the VFD display on the unit shows the elapsed time for the disc which is being played
If “TOTAL REMAIN” is displayed, the VFD display on the unit shows the remaining time for the disc which is being played
Displaying a scene with a larger and closer view
This zoom in function enables you to take a closer look at the scene you are viewing.
This is especially a useful function when you are watching science fiction or an adventure film.
Press ZOOM during playback.
You can change the zooming ratio by pressing ZOOM button more than once.
∞NOTE:
•You can move in the picture i.e change the zoomed location by using the 3/4/6/5 arrow keys.
To return to normal play:
After the biggest zoom ratio, press ZOOM again. “Zoom Off” is displayed on the screen and the picture is now in its normal size.
Intro - Digest menu
Press STOP button if it is in play mode.
Press MENU button in order to see the menu. This menu contains:
1.Intro
2.Disc
3.Track
4.Exit
- 22 - | EN |
