EMl-31061A

7. CONNECTING THE INTERFACE CABLE AND REMOTE CABLES

7.CONNECTING THE INTERFACE CABLE AND REMOTE CABLES

7.CONNECTING THE INTERFACE CABLE AND REMOTE CABLES

I

WARNING:

Disconnect

the power cord before

I

 

 

 

 

connecting

the cables.

 

1.Remove the blind plate (right side).

NOTE: Be careful NOT TO LOSE the screw 8

(M-4x 10).

2.Connect the interface cable cable to the connector on the CPU board.

3.FIX the interface cable cable to the base using the clamp and screw 0 (FL-4 x 14).

4.For remote display type, connect the remote cable to the connectors on the CPU board.

5.Fix the remote cable to the base using the clamp and screw 0.

6.Attach the blind plate using screw 0.

CPU p! Board

Interface Cable

CPU PC Board

7- 1

Page 12
Image 12
Toshiba SL-47-N manual Disconnect Power cord before Connecting Cables, Connecting the Interface Cable and Remote Cables