1. INTRODUCTION
EMl-31061A
1. INTRODUCTION
Safety Precautions
This Owner’s Manual and the products (machines) which you have purchased contain indications which
should be observed in order to use the machines safely and prevent harm to yourself and others and
damage to property. The meanings of these indications and symbols are given below.
Read these indications and become familiar with their contents before reading this Owner’s Manual.
The following safety precaution will help to ensure proper use of the scale.
Unplug the printer whenever you are working inside the scale.
Keep your work environment static free.
Meanings of Each Symbol A 1
This symbol indicates warning items (including cautions).
Specific warning contents are drawn inside the Asymbol.
0 (The symbol on the left indicates a general caution.)
cs
This symbol indicates prohibited actions (prohibited items).
Specific prohibited contents are drawn inside or near the 6~ symbol.
(The symbol on the left indicates “no disassembling”.)
This symbol indicates actions which must be performed.
Specific instructions are drawn inside or near theOsymbol.
(The symbol on the left indicates “disconnect the power cord plug from the outlet”.)
w Do not plug in or unplug the power
Prohibited c1
cord plug with wet hands as this may
cause electric shock.
11
S If the machines share the same
outlet with any other electrical
appliances which consume large
amounts of power, the voltage will
fluctuate widely each time these
appliances operate. Be sure to
provide an exclusive outlet for the
machine as this may cause the
machines to malfunction.
n
Do not insert or drop metal,
flammable or other foreign objects into
the machines through the veniitation
this may cause fire or electric
n
Do not use voltages other than the
w
4ny other than the
voltage (AC) specified on the rating
rptxifkd AC voltage is
plate, as this may cause fire or
xohibiled. d?~Gl (;;;I
electric shock.
Prohibit&
n
Do not place metal objects or
water-filled containers such as flower
vases, flower pots or mugs, etc. on
top of the machines. If metal objects
or spilled liquid enter the machines,
this may .cause fire or electric
shock.
H Do not remove covers, repair or
modify the machine by yourself. You
may be injured by high volta e, very
hot parts or sharp edges ins1 e the 3
machine.