Toshiba ST-7000-C Series owner manual Connectors, Description

3. CONNECTORS	EO1-12030
	3. CONNECTORS

3.

CONNECTORS

#

COM5

Powered USB (24V)

LINE OUT

24V Power

#

(Option)

(Option)

for Printer

(Option)#

#

Powered USB (12V)

COM6

#

(Option)

(Option)

MIC (Option)

#

#

#

#

#

#

#

#

#

#

#

#

#

LPT1

VGA

DRW1

PS/2 K/B

COM2

#

COM1

#

COM3

COM4

LAN

DRW2

#

#

Connector

Description

AC Inlet

A connector for the AC inlet

AC Outlet

A connector to supply AC power to the CRT.

AC power is output in synchronization with the ON/OFF status of the POS terminal.

P24V DC Outlet

A terminal of a DC24V line to which the power cable of the Receipt/Journal printer is

connected.

PS/2 (Keyboard)

Mini-DIN 6-pin female type connector.

Connector for the PS/2 type keyboard.

USB0, 1, 2, 3 (Powered

Connector for the USB (Universal Serial Bus) interface USB V2.0/1.1 and UHCI

USB) (Option)

(conforming to Universal Hub Controller Interface V2.0/1.1)

NOTE: USB functions may not be supported depending on the Operating System.

USB0 to USB3 are powered USB sockets, which are 3 ports of 12V USB (USB0 to

USB2) and 1 port of 24V USB (USB3). The lower part of these sockets can be used

as general 5V USB connectors.

LAN

Modular type connector for the 10BASE-T/100BASE-TX LAN interface

DRW1, DRW2

A 24V type drawer is connectable.

VGA

A 15-pin VGA connector to the CRT

COM1, 2

D-sub 9-pin male type connector (without power supply)

A slot scanner, modem, serial Interface type scale, EFT, etc. are connectable.

COM3, 4, 5, 6

D-sub 9-pin female type connector (with +5V, +12V output)

(COM5, 6: Option)

A line display unit or RS-232C type hand scanner is connectable.

NOTES:

1 COM6 cannot be used when the touch panel TFT is connected to the POS terminal.

2. COM6 is available only when the optional kit is installed.

LPT1

D-sub 25-pin female connector

Printer, etc. having a Centronics interface or equivalent are connectable.

Line-out (Option)

Used for connecting an external speaker via the stereo mini jack terminal

Mic-in (Option)

Used for connecting a monophonic microphone via the mono mini jack terminal

*: COM6 is installed on the PCI slot.

3- 1