Use only memory modules approved by TOSHIBA.
Do not try to install or remove a memory module under the following conditions.
a. The computer is turned on.
b. The computer was shut down in either Sleep or Hibernation Mode. c.
d. The wireless communication function is on.
Be careful not to let screws or other foreign matter fall into the computer. It could cause malfunction or electric shock.
Additional memory module is a precision electronic component that may be fatally damaged by static electricity. Since the human body can carry static electricity, it is important that you discharge yourself before touching or installing any additional memory modules. To discharge your body’s static electricity, simply touch any metal close to you with bare hands.
Use a point size 0 Phillips screwdriver to remove and fasten the screws - the use of an incorrect screwdriver can damage the screw heads.
Installing a memory module
To install a memory module, follow the steps as detailed below:
1.Shut down the computer - make sure the Power indicator is off.
2.Remove the AC adaptor and all cables and peripherals connected to the computer.
3.Close the display panel.
4.Turn the computer upside down and remove the battery pack (refer to Replacing the battery pack section, if required).
5.Loosen the screw securing the memory module cover in place - please note that the screw is attached to the cover in order to prevent it from being lost.
User's Manual |