5 Press ENTER.

The program setting is now memorized.

•If your cable box is not remote- controllable, select the recording channel on the cable box beforehand.

 

PROGRAM

 

SET UP

 

 

 

PRESET

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CH

DATE

On

 

OFF

 

SPD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

P

 

P

 

 

 

2 5

8/30

9:30

M 10:00

M

SP

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

- -

-/--

 

-:- -

-:- -

 

 

 

-

 

EnD : PROG

6

To set another program, repeat steps 1 to 5.

 

 

 

 

7

Press both TIMER simultaneously.

REC

 

 

 

TIMER

The power turns off and the VCR

 

 

 

 

 

 

 

 

 

enters the timer stand-by mode.

TIMER

 

 

 

 

 

 

 

 

 

 

RECORDING

Confirming the VCR Plus+C3® system

 

Recording or playback in the timer
timer programs

 

standby mode
Before the VCR enters the timer standby mode (TIMER indicator not lit)

1)Press PROG. to display the MENU screen.

2)Press ENTER to select “PROGRAM”. Check the programmed data.

3)Press PROG. twice to exit.

During the timer recording

1)Press PROG..

2)The screen for confirming appears.(Check the programed data).

3)Press PROG to exit.

First press both TIMER to release the timer standby mode, and then press POWER to turn on the VCR. The VCR will be available for use.

•Be sure to press both TIMER again to return the VCR to the timer standby mode after you have finished.

Error indications

If “FULL / CANCEL PROG?” message appears on the TV during programming, no more programs can be entered. If you want to add another, delete one existing program on the screen by using a number button.

Cancelling the VCR Plus+C3® system timer programs

1)If the TIMER indicator is lit, press both TIMER to turn it off, and turn on the VCR by pressing

POWER.

2)Press PROG. to display the MENU screen.

3)Press ENTER to select “PROGRAM”.

4)Select a program which you want to cancel.

5)Press CANCEL.

The line is cleared out.

6)Press PROG. twice to exit.

If an incorrect PlusCode® programming number is entered, “ERROR CODE ENTERED” appears on the screen. Press CANCEL to clear the number and enter correct one.

If “CLASH” message appears on the TV during programming, it tells you that two programs with the same recording start time have been entered. Correct either of the two programs as follows:

1)Enter the number of the program to correct by using number buttons.

2)Correct the data, or clear out the line by

pressing CANCEL and then press

VCR Plus+ to enter a PlusCode® programming number.

31