PLAYBACK
Playback
This section explains the basic playback operation.
Preparation
•Select the video channel (3 or 4) or video input mode on the TV.
•Press VCR to set the remote control operating the VCR.
Basic Playback
VCR
1 2 3
4 5 6
TV/VCR
7 8 9 + 8
0 |
| – | 9 |
( | - |
| ) |
|
| ||
a | L |
| J |
| PROG |
|
|
|
| – |
|
|
|
| + |
V | F | WD |
|
RE |
|
|
REW
2
FF
3
19∝
TRK RESET
TRACKING
1 Load a recorded cassette.
POWER
Power is turned on.
If the cassette has no safety tab, playback starts automatically.
2 Press PLAY to start playback.
POWER
S P VCR
DT
3 To stop playback, press STOP.
Rewinding / Fast-forwarding
Press REW or FF in the Stop mode.
PLAYBACK
Adjusting the tracking
When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound (Digital Auto Tracking).
The “DT” indicator blinks during the adjusting. If the VCR cannot locate the best possible tracking point, hold down one of TRACKING to adjust the tracking manually.
•To resume the digital auto tracking, hold down both CHANNEL on the VCR simultaneously for about 2 seconds.
Notes
•During the adjusting, the playback picture and sound may be distorted.
•The digital auto tracking is activated only in the playback mode.
•To reset the manual tracking point to the center, press both CHANNEL on the VCR simultaneously or TRK RESET for not longer than 1 second.
•The noise on the screen may not be completely eliminated depending on the tape used, especially when the tape was recorded on another VCR.
19∝ HEAD
You can view high quality pictures while playing back a tape recorded in the SLP tape speed.
By pressing 19∝ repeatedly, the 19∝ HEAD mode is displayed on the TV screen as follows:
Note
During playback with the 19∝ head, momentary noises or shakes may be produced when you change the mode to the picture search or variable speed playback.
2 1