Section 2
Getting Started
Loading the Battery
Before using the camcorder, users must load the Lithium- ion rechargeable battery come within the package.
1.Slide the safety latch to the unlocked position and open the battery cover.
2.Insert the battery according to the correct polarity marks
( + or
3. Close the battery cover firmly, and slide the safety latch to the locked position.
Note
Please remove the insulator on battery connection before use.
Inserting and Removing an SD Card (Optional)
The camcorder comes with an internal memory which allows you to store pictures and movies. You can expand the memory capacity by using an optional SD/SDHC memory card.
1.Insert the memory card into the slot. Please refer to the figure on the right side.
2.To remove an installed SD card, press the card inwards to release it.
3.When the card pops out, gently remove it from its slot.
4.Recommended memory capacity: 1GB and above.
Note
•When a memory card is fitted, movies/pictures are saved on the card rather than on the
•Protecting Data on an SD Card: SD Card is read- only when it is locked. No pictures or movies can be recorded when the SD card is locked. Make sure the lock is on the writeable position before recording any media.
Writeable
positionPosition
10
EN
