Toshiba ZH37 Series, ZH36 Series owner manual Manual tune Programme skip, Press OK to store

PLEASE NOTE

Manual tune continued Programme skip

4Press R to select System and use P or Q to change (if required, see page 7).

5Then press R to select Search.

6Pressing P or Q will begin the search. Search will flash and the television will show the channel numbers.

Manual Tuning

Search

f

z	0	I	>>>	32	0	VCR		x
EXIT Watch TV			e				z xSelect
MENU Previous							fe Adjust
OK	Store

7Each signal will show on the television, if it is not your VCR, press P or Q again to restart the search.

8When your VCR signal is found, press R to move along to Station. With P, Q, S and R put in the required Name, e.g. VCR.

			Manual Tuning
	Station Name					f
z			>>>				x
	0	I		60	0	VCR
						e

EXIT Watch TV	z xSelect
MENU Previous	fe Adjust
OK Store

9Press OK to store.

10Repeat for each programme position you want to tune or, press MENU to return to the list of channels and select the next number to tune.

11Press EXIT when you have finished.

This TV has direct channel entry if the channel numbers are known.

Select the Manual Tuning screen in Step 3. Enter the Programme number, the System, then the Channel number. Press OK to store.

Programme skip

To prevent certain programmes from being viewed, the programme position can be skipped and the remote control removed. The television can then be watched as normal using the controls on the front, but the set will not show the skipped programme position.

1Select Manual Tuning from the Set up menu.

f		Manual Tuning
	Prog.	Channel	Station
	0	60	VCR
	1	22	BBC1
	2	28	BBC2
	3	25	ITV
	4	32	CH4
e	5	* 69
EXIT Watch TV			fe Select
MENU Previous			z x Change
OK	Change

2Use P or Q to highlight the programme position to be skipped and press OK or Rto select.

3Press Rto select Programme skip.

4Use P or Q to turn Programme skip on. Press OK to store.

*on the screen indicates a skipped programme position.

Manual Tuning

Programme skip

f

z 1 I >>> * 28 0 BBC1 x

e

EXIT Watch TV	z xSelect
MENU Previous	fe Adjust
OK Store

5Press MENU and repeat from Step 2 or press EXIT.

Each programme position has to be individually selected. To turn Programme skip off, repeat the procedure for each position.

Skipped programme positions cannot be selected by Pf(P) and P e(Q) or by the controls on the front of the TV, but can still be accessed by the number buttons on the remote control.

9