TL-WPA4220/TL-WPA281300Mbps AV500/AV200 WiFi Powerline Extender

2Connect the other end of the Ethernet (RJ45) cable to an available Ethernet port of your wireless router.

3Plug the powerline extender or powerline adapter into a wall socket.

4Check and confirm the LEDs status. (The Power LED and Ethernet LED on the powerline device should be ON.)

The hardware connection mechanism is shown below:

)Note:

Do not connect the powerline extender or powerline adapter to an extension lead, power strip, extension cord, or surge protector, as these may degrade the network performance.

Step 2: Connecting the Computer

Following are the steps to properly connect the powerline extender to your computer:

1Connect one end of the provided Ethernet (RJ45) cable to the powerline extender’s Ethernet port.

2Connect the other end of the Ethernet (RJ45) cable to you computer’s LAN port.

3Plug the powerline extender into a wall socket next to the computer.

4Turn on your computer.

5Check and confirm that the Power LED and Ethernet LED on the powerline extender are ON.

6

Page 14
Image 14
TP-Link AV200, AV500 manual Connecting the Computer