TP-Link N600 manual CD Setup Wizard For Windows users only, unable to run the Resource CD

Package Contents

The product model shown in this QIG is TD-W8980, as an example.

CD Setup Wizard ( For Windows users only )

1	Insert the TP-LINK Resource CD into the CD-ROM drive.	3	Then a ￿ash video will pop up and show you how to connect
			your devices. When you ￿nish the hardware connection, click
			to continue.

Quick Installation Guide

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router

Please select your preferred setup wizard.

CD Setup Wizard

For Windows users only

Web-based Quick Setup Wizard

For Mac OS/Linux/Windows users who are

TD-W8980

Ethernet Cable

N600 Wireless Dual Band Giabit ADSL2+ Modem Router

Please select your preferred setup wizard.

CD Setup Wizard

For Windows users only

Web-based Quick Setup Wizard

For Mac OS/Linux/Windows users who are unable to run the Resource CD

TD-W8980/TD-W8980B

QIG

Power Adapter Resource CD

ADSL Splitter Phone Cable x 2

2	Click StartSetup.	4	The Easy Setup Assistant will start. Please check to see if the
			LEDs (especially the ADSL LED) of your modem router display

normally as the chart describes. Then click NEXT, and follow the step-by-step instruction until you complete the con￿guration.

unable to run the Resource CD

MODEL NO. TD-W8980/TD-W8980B

Necessary Information

For a smoother setup, we suggest that you consult yourISP ￿rst and ask for the following information . This information will be used during the con￿guration stage.

VPI/VCI:Connection Type: Encapsulation Type (Optional):

For the advanced con￿gurations, please refer to the User Guide on the Resource CD provided. You can also log on to www.tp-link.com -> select your region -> search for the product -> User Guide can be found under the “Download” tab on the product page.

Web-based Quick Setup Wizard ( For Mac OS/Linux/Windows users who are unable to run the Resource CD)

1Hardware connection.

Phone Cable

Wall Socket

LINE

Splitter

PHONE MODEM

1		Computer
	3	2
Phone Cable	Ethernet Cable

Step 1: Connect your devices step by step following the ￿gure.

Step 2: Power on all your devices and then check the LEDs (especially the ADSL LED).

Name	Status	Indication
(Power)	On	The modem router is powerd on.
	On	ADSL line is synchronized and ready
(ADSL)		to use.
	Flashing	ADSL negotiation is in progress.
(WLAN)	Flashing	Wireless is enabled.
	On	There is a device conneted to this LAN
		port.
(LAN 1-4)
		The modem router is sending or receiving
	Flashing
		data over this LAN port.

2

3

Open your browser and type http://192.168.1.1 in the address ￿eld. Then use the default user name admin and password admin to log in.

If you are unable to access 192.168.1.1, please

refer to T3 in Troubleshooting.

Click Quick Setup in the main menu and then click Next.

7106504377 REV1.1.0