TP-Link Rev 1.0.0 1910010810 manual Forwarding, Virtual Servers, To Reserve an IP address

TL-WR841HP300Mbps High Power Router User Guide

To Reserve an IP address:

1.Click the Add New… button. Then Figure 4-30will pop up.

2.Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal notation) of the computer for which you want to reserve an IP address.

3.Click the Save button.

Figure 4-30 Add or Modify an Address Reservation Entry

To modify or delete an existing entry:

1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.

2.Modify the information.

3.Click the Save button.

Click the Enable/Disable All button to make all entries enabled/disabled Click the Delete All button to delete all entries.

Click the Next button to go to the next page and Click the Previous button to return the previous page.

4.8 Forwarding

Figure 4-31 The Forwarding menu

There are four submenus under the Forwarding menu (shown in Figure 4-31),Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function.

4.8.1 Virtual Servers

Choose menu “Forwarding → Virtual Servers”, you can view and add virtual servers in the screen as shown in Figure 4-32.Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all requests from the Internet to this service port will be redirected to the computer specified by the

- 44 -