Chapter 2. Hardware Installation
2.1The Front Panel
Figure
The LEDs locate on the front panel, which indicate the device’s working status. For details, please refer to LED Explanation.
LED Explanation:
| Name |
| Status |
| Indication |
|
|
| On |
| LAN port normal |
| LAN |
| Off |
| Connection on LAN port abnormal |
|
|
| Flash |
| Data transmitting or receiving on LAN port |
|
|
|
|
|
|
|
|
| Slow flash |
| Connection to telecom network is abnormal |
| ADSL |
| Quick flash |
| Connecting to the telecom network |
|
|
| On |
| Connection to telecom network is OK |
|
|
|
|
|
|
|
|
| Flash |
| There is data transmitting or receiving on WAN |
| Act |
|
|
| port |
|
|
| Off |
| No data transmitting or receiving on WAN port |
|
|
|
|
|
|
| Power |
| On |
| Power OK |
|
| Off |
| Power fail | |
|
|
|
| ||
|
|
|
|
|
|
2.2The Back Panel
Figure
¾ON/OFF: The switch for the power.
¾POWER: The Power plug is where you will connect the power adapter.
¾RESET: There are two ways to reset the Modem's factory defaults.
Method one: When the device is working, please press the reset button of the Modem, keep the reset button pressed down for more than five seconds and then wait for the modem to reboot.
Method two：Restore the default setting from
2