TD-VG3631 300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide
57
If “TimeOut” is selected, the dialing will be sent out when timeout starts. The timeout activates
when no more digits are dialed in a specific duration;
If “#” is selected, the dialing will not be sent until “#” is dialed;
If “#/TimeOut” is selected, the dialing will be sent out when timeout starts or “#” is dialed;
If “None” is selected, the dialing will not be sent out unless the length of number you dial
meets the Max Length.
¾ Operate: Specify a dialing method to make call(s).
Strip Prefix – If it is selected, the original phone number will be sent out with the prefix
deleted; you can limit the strip length by entering digits in “Strip Length” field.
Take the 1st dial plan in Figure 4-38 as an example. If you dial 12340000, number 40000
will be dialed out to make a call.
Replace Prefix – If it is selected, the original phone number will be sent out with the prefix
replaced by what you set in the “Replace With” field.
Take the 2nd dial plan in Figure 4-38 as an example. If you dial 186666, number
18655556666 will be dialed out to make a call.
Add Number – If it is selected, the original phone number will be sent out with what you
set in “Add Number” field added ahead.
Take the 3rd dial plan in Figure 4-38 as an example. If you dial 018655556666, number
1795101865555666 will be dialed out to make a call.
¾ Interface Enable: You can check any box to enable interface(s). Numbers matching prefix in
Dial Plan List can only be dialed out through the selected interface(s).
4.7.2.2 Forbidden Call
Choose “VoiceÆDial Plan ÆForbidden Call”, you will see the screen similar to Figure 4-39.
Forbidden Call makes it possible for administrators to control user's access to the voice service.
Figure 4-39
¾ Prefix: Displays the prefix of your plan. This prefix refers to the initial digit(s) of the numbers
you dial.
¾ Forbidden: Displays the interface(s) disabled in this plan.
¾ Remove: Check the box and then click the Remove button below so that the very plan will
be deleted.
¾ Edit: Click the Edit button to modify the very plan.
To add a dial plan, click the Add button in Figure 4-39. Fill in the following parameters and click
the Save button in Figure 4-40.