TD-W9980 N600 Wireless Dual Band Gigabit VDSL2 Modem Router User Guide
91
4. Select a target from the IPv6 WAN Host st or choose “Add IPv6 WAN Host”.
ose “Add IPv6 Schedule”.
v6. Select one of them
selected entries.
t list in
drop-sown li
5. Select a schedule from the IPv6 Schedule drop-down list or cho
6. In the Action field, select Deny or Allow to deny or allow your entry.
7. In the Status field, select Enabled or Disabled to enable or disable your entry.
8. In the Direction field, select IN or OUT from the drop-down list for the direction.
9. In the Protocol field, here are four options, All, TCP, UDP, and ICMP
from the drop-down list for the target.
10. Click the Save button to save the settings.
Click the Enable/ Disable Selected button to make selected entries enabled or disabled.
Click the Delete Selected button to delete
4.16.2 IPv6 LAN Host Choose menu “IPv6 Firewall” → “IPv6 LAN Host”, and then you can view and set a Hos
the screen as shown in Figure 4-90.
Figure 4-90
Description: Here displays the description of the host and this description is unique.
IPv6 Address Info: Here displays the information about the host.
Edit: To modify an existing entry.
Figure 4-91.
To add a new entry, please follow the steps below.
1. Click the Add New button, and you will see the screen as shown in
Figure 4-91
2. Create a unique name for the host (e.g. Host_1) in the Description field.
3. Enter an IPv6 address in the IPv6 Address field.
4. Enter the prefix length of the IPv6 addre fix Length field.
Click the Delete Selected button to delete selected entries.
ss in the Pre
5. Click the Save button to save the settings.